Quickfix Fasteners | Hidden Fastening System | Ekodeck

Designed specifically for Ekodeck+, Quickfix has made it even easier and faster than ever to install your deck.

Using a simple clip system both professionals and DIYers report an average 30% time saving using Quickfix. This leaves you with a deck free of fasteners and a clean, modern finish.

Our Quickfix kits come in handy packs with everything you need to install your deck from start to finish.

Quickfix automatically gaps your boards and is now available in both 3mm or 6mm board spacing options – saving you time (and money) with its ease and speed of installation.

Suitable for both timber or steel joists, Quickfix has you covered for your next decking project.

Concealed fixing system

At least 30% faster to lay

Automatically gaps boards

Easy for DIY

Family safe – no sharp nails or screws

Huge time saving for trades

How the system works

Choose your gap
1. 3mm
2. 6mm
Choose your joist material
1. Timber
2. Steel
Clip information
1. C-Clip
2. Standard clip - 3mm
3. Standard clip - 6mm
4. Locking clip - 3mm
5. Locking clip - 6mm

Products

Quickfix kits

Comes in lineal metre pack sizes with all components to install your Ekodeck+

Board spacing	Joist material	Coverage (lineal metre)
	Timber	100m pack
Item No. 0130268 Contents 250 Standard Clips 14 C-Clips 40 Locking Clips 306 316 SS Screws 2 SQ1 Driver Bits Coverage 100 lineal metres 15m² Approx. 20 x 5.4m boards *Also suitable for Steel Joists. Rivets not supplied. Get prices
	Timber	100m pack
Item No. 0089490 Contents 250 Standard Clips 14 C-Clips 40 Locking Clips 306 316 SS Screws 2 Star 15 Driver Bits Coverage 100 lineal metres 15m² Approx. 20 x 5.4m boards Get prices
	Timber	350m pack
Item No. 0089491 Contents 800 Standard Clips 30 C-Clips 120 316 SS Screws 965 316 SS Screws 2 Star 15 Driver Bits Coverage 350 lineal metres 50m² Approx. 65 x 5.4m boards Get prices
	Steel	100m pack
Item No. 0089493 Contents 250 Standard Clips 14 C-Clips 14 Rivets 300 401 SS Screws 2 Star 15 Driver Bits Coverage 100 lineal metres 15m² Approx. 20 x 5.4m boards Get prices

Accessories

Depending on your deck design and layout, you may require additional clips

Name		Link to see more
C-Clip	8 pack
8 x C-Clips Get prices
Locking Clip	10 pack
10 x locking clips and stainless steel screws One locking clip required per Ekodeck Plus board regardless of its length Suitable for timber and steel joists Get prices

Get prices

Installation

Fast and easy – installing Ekodeck+ with Quickfix is going to change the way decking is installed forever.

Check out our how-to videos to see how it's done!

3MM QUICKFIX SYSTEM

Made from marine-grade 316 stainless steel, our 3mm Quickfix system has been developed to give a tighter, 3mm gap between boards when installing your Ekodeck+. If you want an architecturally inspired outdoor area, our 3mm Quickfix system is the answer.

Download 3mm (Timber/Steel) Installation Guide

6MM QUICKFIX SYSTEM

Tried and tested in the Australian climate for years, our longstanding 6mm Quickfix system is the quick and easy way to lay your decking. Made from specially engineered nylon and stainless steel, our 6mm system gives you a flawless finish without any screws or fasteners.

Download 6mm (Timber) Installation Guide

Download 6mm (Steel) Installation Guide

Quick steps

Expand all

Measure and cut your Ekodeck+ to size. Be sure to consider the temperature when installing as Ekodeck+ will expand and contract with the heat.?

Set out your starter clips and install your first board.

Insert standard clips on every joist, except for the centre joist where a locking clip is installed. Screw down slightly and repeat for 6-10 boards. Ensure the boards are square then screw down completely.

Wash down your new Ekodeck+. Follow the steps for a general clean to remove any dirt or debris. Download our Installation Guide for more information.

How the system works

Choose your gap

Choose your joist material

Clip information

C-Clip

Standard clip - 3mm

Standard clip - 6mm

Locking clip - 3mm

Locking clip - 6mm