Fast and easy – installing Ekodeck+ with Quickfix is going to change the way decking is installed forever.
Check out our how-to videos to see how it's done!
Made from marine-grade 316 stainless steel, our 3mm Quickfix system has been developed to give a tighter, 3mm gap between boards when installing your Ekodeck+. If you want an architecturally inspired outdoor area, our 3mm Quickfix system is the answer.
Tried and tested in the Australian climate for years, our longstanding 6mm Quickfix system is the quick and easy way to lay your decking. Made from specially engineered nylon and stainless steel, our 6mm system gives you a flawless finish without any screws or fasteners.
Measure and cut your Ekodeck+ to size. Be sure to consider the temperature when installing as Ekodeck+ will expand and contract with the heat.?
Set out your starter clips and install your first board.
Insert standard clips on every joist, except for the centre joist where a locking clip is installed. Screw down slightly and repeat for 6-10 boards. Ensure the boards are square then screw down completely.
Wash down your new Ekodeck+. Follow the steps for a general clean to remove any dirt or debris. Download our Installation Guide for more information.