Ekodeck's BAL-29 rated decking board - for use in bushfire prone areas.
Certified BAL29 bushfire rating
Natural, variable colour & timber grain
100% Polymer Durashell™ coating
Superior stain resistance
Made using over 80% reclaimed & recycled materials
Certified BAL29 bushfire rating
Equipped with Durashell™ coating
No oiling, painting or sealing
Variable timber grain look
UV stabilised
Superior stain resistance
Quick & easy installation
Will not splinter, cup or twist
Rot, decay & termite resistant
Anti-slip rated – R10 & P5
Made using over 80% reclaimed & recycled materials
Up to 20-year warranty
Ekodeck+ Flame Fighter has been designed for installation using our concealed fixing system, Quickfix. To align with industry standard for bushfire installations and requirements, we have gone to the lengths of developing a new Quickfix system with a tighter, 3mm spacing and 100% stainless-steel componentry and clips.
This makes for a clean, modern look free of fasteners and a faster, easier installation. Say goodbye to marking out screw positions, pre-drilling and countersinking your boards! The simple clip system automatically gaps the boards saving you time and money with its ease and speed of installation.
Great for both professionals and DIYers alike, Quickfix is the quick and easy fastening system of the future. Please be sure to obtain a copy of AS 1530.8.1 prior to commencing your build.
Plan your area ensuring your framework is compliant and compliments the finished design of your deck. Cut the Ekodeck+ Flame Fighter boards slightly oversize – its best to trim at the same time once all boards are laid.
Plan your area ensuring your framework is compliant and compliments the finished design of your deck. Cut the Ekodeck+ Flame Fighter boards slightly oversize – its best to trim at the same time once all boards are laid.
Insert standard clips on every joist, except for the centre joist where a locking clip is installed. Screw down slightly and repeat for 6-10 boards. Ensure the boards are square then screw down completely.
Set up a straight edge and trim your overhung boards to size in one go. Install fascia boards where necessary. Wash down your Ekodeck+ Flame Fighter boards for a clean finish.
Centre-to-centre joist spacing (max) | 450mm |
Min. ground clearance (with adequate drainage) | 40mm |
Min. ground clearance (without adequate drainage) | 90mm |
Min. side-to-side gap (board spacing) | 3mm or 6mm, auto-spaced by clip |
Recommended end gap | Refer to table |
*Gap distances vary depending on temperature during installation. Refer to the installation guide for more information.
The below table can be used as a guide to discern the appropriate end gap (in mm) to leave when installing your boards.
|
Temperature during installation (oC) |
||||
10 |
20 |
30 |
40 |
||
Board Length (m) |
1 |
2 |
1 |
0 |
0 |
2 |
2 |
1 |
0 |
0 |
|
3 |
2 |
1 |
0 |
0 |
|
4 |
3 |
2 |
0 |
0 |
|
5.4 |
3 |
2 |
0 |
0 |
Ekodeck+ Flame Fighter’s innovative Durashell coating makes it easier than ever to look after your deck. Most stains are able to be easily wiped away, without leaving any blemishes or marks.
Ekodeck+ Flame Fighters low-maintenance characteristics mean you can spend more time enjoying your deck and less time maintaining it – with no oiling, painting or sealing required to keep your deck looking great for years to come!
Maximum Value of all or any Claim Amount | Commercial Application | Residential Application |
---|---|---|
Claim Period |
Claim Period |
|
100% | Purchase to end of the 5th year* | Purchase to end of the 10th year |
80% | 6th year | 11th – 13th years |
60% | 7th year | 14th -15th years |
40% | 8th year | 16th -17th years |
20% | 9th year | 18th – 19th years |
10% | 10th year | 20th year |
3.64kg/m (19.66Kg per 5.4m length)
AS1720.1
450mm (max). Min. 2 spans
ASTM D570-98
0.63%
ASTM G154, or EN 15534-1:2014 Section 8.1 ISO 4892-2:2013, cycle 1
600h, Grey Level >= 3
ISO 4892-2:2013 cycle 1
After 720-hour test, there was slight colour change. E*=0.58, Grey scale 4-5
1. AS4586:2013 Oil-wet inclining platform method
Result: R10
2. AS4586-2013 Wet pendulum test method
Result: P5
ISO 16869:2008 Plastic assessment of the effectiveness of fungistatic compounds in plastic formulations
0 (no growth)
ASTM D696-08
3.31x10-5 cm/cm/oC
ASTM D792-13 Method B
1.19g/cm3
ASTM D2240-05(2010)
D/70/1
ASTM D4812-11
88 J/m
C (Complete break)
BS EN15534-1:2014 + A1: 2017 Section 7.5 EN15534-4: 2014 Section 4.5.7
Brinell hardness: 72 Mpa Rate of elastic recovery: 72%
BS EN15534-1:2014 + A1: 2017 Section 7.1.2.1 EN15534-4: 2014 Section 4.5.1
Type: Solid profile max/crack length(mm): no crack Max. Residual indentation (mm) 0.08
ASTM D4060-14
Mass/Weight loss, 40.5mg
EU Reach regulation N01907/2006 Article 33(1) Obligation to provide information of safe use (see REACH requirement in report for details)
PASS
All co-extruded composite decking, including Ekodeck+ Flame Fighter can, under certain conditions, exhibit build-up of static electricity.
Low humidity and dry environmental conditions are the biggest contributing factors of static electricity build-up. Other factors include, but are not limited to, subframe materials, earthing and/or balustrading.
This phenomenon may be reduced by using an anti-static spray (such as ACL Staticide). These products are water based and may require additional applications after rain or other weather conditions. Anti-static mats or insulating touch points such as balustrades or door handles may also assist.
Generally, the static build-up tends to reduce over time as the boards wear in. Ekodeck does not warrant against static build-up in Flame Fighter boards.
Ekodeck+ Designer Series gives you the same great features of Ekodeck+ with the added benefit of our coveted Durashell™ coating. The Designer Series comes in 6 great colours, featuring a natural, variable timber-grain look which will transform any outdoor area. Ekodeck+ Designer Series also exhibits superior stain resistance thanks to Durashell™ which is highly durable and great for entertaining areas.
Durashell™ is a protective coating made up of a mix of proprietary polymers, giving you an industry-leading variable timber-grain look as well as a strong, durable shield against staining and discolouration. Durashell™ wraps and protects the entirety of the board, shielding the core from moisture, UV and the elements. This ensures Ekodeck Designer Series can withstand the harshest climates in Australia and allows us to offer an exceptional warranty.
No, during the manufacturing process Durashell™ is fused to the core during the coextrusion stage of production. This ensures the Durashell™ coating cannot delaminate and will stand the test of time.
Ekodeck+ Designer Series is installed using our concealed fixing system, Quickfix. This leaves you with a deck free of fasteners for a clean, modern look without the hazard of protruding screws or nails.
Ekodeck’s long-lasting features allow it to outlive traditional timber. Equipped with UV stabilisers and anti-mould agents, Ekodeck+ Designer Series will not fade to grey like timber and is resistant to rot and decay. Unlike timber, Ekodeck+ Designer Series does not require constant oiling, sealing or staining - making Ekodeck+ Designer Series a low maintenance product with superior durability.
Ekodeck+ Designer Series has the same great UV stability you’ve come to expect from Ekodeck products. Ekodeck+ Designer Series will never fade to grey like timber when exposed to the elements. Ekodeck+ Designer Series contains natural timber fibres. When exposed to UV these fibres will slightly lose their brightness. This is a normal process for any exterior building material. After 3-6 months Ekodeck+ Designer Series will stabilise and maintain its colour.
Just like Ekodeck, Ekodeck+ Designer Series does not require any oiling, painting, sealing or staining, making it an ultra-low maintenance product. If there is a foreign stain on your deck, you can easily clean it up using a damp cloth, or for a more thorough clean give it a scrub with warm soapy water and a medium bristle brush.
Where possible, it is preferable to preserve the Durashell™ coating of your Designer Series boards as best as possible. As Ekodeck+ Designer Series are double sided, we recommend routing the leading edge of your decking and fascia boards to allow a ship-lap style joint for your fascia and finishing board.
Yes, Quickfix is available to suit both timber and steel joists.
Ekodeck+ Designer Series does not require the use of any specialised tools. Standard wood-working tools can be used when installing Ekodeck+ Designer Series.
Ekodeck+ Designer Series is not classified as a structural product therefore it cannot be used as a subframe.
Being a composite product, Ekodeck+ Designer Series is made up of recycled plastics, and will get marginally hotter than traditional timber. Darker colours absorb more heat – so please take care on hot days. If you wouldn’t go barefoot on a timber on a hot day, please avoid doing so on Ekodeck+ Designer Series.
No, due to the plastic component of Ekodeck+ Designer Series, painting, staining or sealing is not recommended.
Yes, you can use a pressure washer to clean Ekodeck+ Designer Series.
You can request samples via our website here.
All co-extruded composite decking, including Ekodeck+ Flame Fighter can, under certain conditions, exhibit build-up of static electricity.
Low humidity and dry environmental conditions are the biggest contributing factors of static electricity build-up. Other factors include, but are not limited to, subframe materials, earthing and/or balustrading.
This phenomenon may be reduced by using an anti-static spray (such as ACL Staticide). These products are water based and may require additional applications after rain or other weather conditions. Anti-static mats or insulating touch points such as balustrades or door handles may also assist.
Generally, the static build-up tends to reduce over time as the boards wear in. Ekodeck does not warrant against static build-up in Flame Fighter boards.