Keep it clean with Quickfix – the concealed fixing system for Ekodeck+

Designed specifically for Ekodeck+, Quickfix has made it even easier and faster than ever to install your deck.

Using a simple clip system both professionals and DIYers report an average 30% time saving using Quickfix. This leaves you with a deck free of fasteners and a clean, modern finish.

Our Quickfix kits come in handy packs with everything you need to install your deck from start to finish.

Quickfix automatically gaps your boards and is now available in both 3mm or 6mm board spacing options – saving you time (and money) with its ease and speed of installation.

Suitable for both timber or steel joists, Quickfix has you covered for your next decking project.

Concealed fixing system

At least 30% faster to lay

Automatically gaps boards

Easy for DIY

Family safe – no sharp nails or screws

Huge time saving for trades

How the system works

  1. Choose your gap

  2. Choose your joist material

  3. Clip information


Quickfix kits

Comes in lineal metre pack sizes with all components to install your Ekodeck+

Board spacing Joist material Coverage (lineal metre) Link to see more
Timber 100m pack
Timber 100m pack
Timber 350m pack
Steel 100m pack


Depending on your deck design and layout, you may require additional clips

Name Link to see more
C-Clip 8 pack
Locking Clip 10 pack
Get prices


Fast and easy – installing Ekodeck+ with Quickfix is going to change the way decking is installed forever.

Check out our how-to videos to see how it's done!


Made from marine-grade 316 stainless steel, our 3mm Quickfix system has been developed to give a tighter, 3mm gap between boards when installing your Ekodeck+. If you want an architecturally inspired outdoor area, our 3mm Quickfix system is the answer.

Download 3mm (Timber/Steel) Installation Guide


Tried and tested in the Australian climate for years, our longstanding 6mm Quickfix system is the quick and easy way to lay your decking. Made from specially engineered nylon and stainless steel, our 6mm system gives you a flawless finish without any screws or fasteners.

Download 6mm (Timber) Installation Guide

Download 6mm (Steel) Installation Guide

Quick steps

Expand all Collapse all

Measure and cut your Ekodeck+ to size. Be sure to consider the temperature when installing as Ekodeck+ will expand and contract with the heat.?

Set out your starter clips and install your first board.

Insert standard clips on every joist, except for the centre joist where a locking clip is installed. Screw down slightly and repeat for 6-10 boards. Ensure the boards are square then screw down completely.

Wash down your new Ekodeck+. Follow the steps for a general clean to remove any dirt or debris. Download our Installation Guide for more information.

Technical specifications

No sign of rust or oxidation - 96hour test

Download Report