Close

Summit Series / Technical Specifications

Ekodeck Decking / Summit Series / Product Manual

PDF 7 MB
Expand all

Structural Design Certification

Ekodeck Summit Series Engineering Evaluation

PDF 0.1 MB

Span

AS1720.1

Domestic and residential activities up to 1.8kN = Max. 500mm span (centre to centre)

Non-residential activities up to 2.7kN (but including residential stairs and landings) = Max. 480mm span (centre to centre)

Ground Clearance

Minimum ground clearance (with adequate drainage): 40mm

Minimum ground clearance (without adequate drainage): 90mm

Bushfire Rating (BAL)

AS1530.8.1:2018

AS1530.4:2014

Bushfire Attack Level (BAL) – 29

Ekodeck Summit Series BAL29 Report

PDF 0.2 MB

Burning Characteristics

AS ISO 9239.1-2003

Critical heat flux (CHF): 5.11kWm2

Integrated smoke value: 682.7%m

2025.02.13 Summit Series AS 9239

PDF 0.5 MB

AS 1530.3:1999

Ignition Time (mins): NI

Flame propagation time: NA

Heat release integrak (Kj/m2): NA

2024.12.30 Summit Series 1530.3

PDF 0.6 MB

Weight

5.28kg/m (28.5Kg per 5.4m length)

Density

ASTM D792-13 Method B

1.3g/cm3

Composition

50% Reclaimed timber
30% Recycled high-density polyethylene (HDPE)
10% Virgin HDPE
10% UV stabilisers, coupling, colourants and anti-mould agents

Coefficient of linear thermal expansion

ASTM D696-16

29.8×10-6mm/mm/oC

Slip Resistance

1. AS4586:2013 Oil-wet inclining platform method

Result: R10

Ekodeck Summit Series R10 Report

PDF 0.2 MB

2. AS4586-2013 Wet pendulum test method

Result: P5

Ekodeck Summit Series P5 Report

PDF 0.2 MB

Ekodeck Decking boards are supplied with a certified anti-slip rating as per AS4586:2013. Over time, dependent on traffic, environment and other external factors, the surface may wear. It is the responsibility of the owner to periodically test the boards to ensure anti-slip rating requirements are being met.

Luminance Reflectance Value



Fairhaven Stirling
In Dry: 36.34 In Dry: 23.46
In Wet: 35.52 In Wet: 23.37

Ekodeck LRV Testing Report 2025 AS 1428.1-2009

PDF 0.9 MB

UV Resistance

ASTM G154-23

1000h, Grey Level = 4.5

Water Absorption

AS/NZS 4266.1:2017

Mean: 0%

Max: 0%

Janka Hardness

ASTM D1037-12

10.09

Charpy Notched Impact Strength

ASTM D6110-18

48J/m

C (Complete break)

Abrasion/Wear Resistance

ASTM D4060-19

Mass/Weight loss, 76mg

Creep Recovery

ASTM D7031-17

87% (requirement >75%) = PASS

Freeze-Thaw Resistance

ASTM D7032-21 & ASTM D6109-19

Pass

Static Electricity

All co-extruded composite decking, including Ekodeck Summit Series can, under certain conditions, exhibit build-up of static electricity.

 

The biggest contributing factors of static electricity build-up are low humidity and dry environmental conditions, the type of subframe materials used in construction and the presence of earthing and/or metal balustrading. Whilst installations where static is noticeable are rare, Ekodeck is not in control of these factors and does not warrant against static build-up.

 

This phenomenon may be reduced by using an anti-static spray (such as ACL Staticide). These products are water based and may require additional applications after rain or other weather conditions. Anti-static mats or insulating touch points such as balustrades or door handles with a sealer may provide a more permanent solution. A clear coat can be applied to insulate touch points – for best results use a UV resistant, outdoor-grade coating. Multiple applications may be required to create an effective insulating barrier.

 

Generally, the static build-up in the boards tends to reduce over time as the boards wear in.

 

Ekodeck does not warrant against static build-up in Summit Series boards due to influencing factors beyond our control.

Ekodeck Summit Series Static Electricity Report

PDF 0.4 MB

Ekodeck Designer Series Leatherwood woman and dog

Get started with Ekodeck

Experience our entire colour range for yourself. We deliver a sample kit complete with each colour direct to your door.

By using this website, you agree to our cookie policy

Accept

Ekodeck® Designer Series and Summit Series are now certified BAL-29 bushfire rated.