Summit Series / Technical Specifications

5.28kg/m (28.5Kg per 5.4m length)

AS1720.1

Domestic and residential activities up to 1.8kN = Max. 500mm span (centre to centre)

Non-residential activities up to 2.7kN (but including residential stairs and landings) = Max. 480mm span (centre to centre)

1. AS4586:2013 Oil-wet inclining platform method

Result: R10

2. AS4586-2013 Wet pendulum test method

Result: P4

ASTM D696-16

31.65×10^-5/^oC

ASTM D792-13 Method B

1.3g/cm³

All co-extruded composite decking, including Ekodeck Summit Series can, under certain conditions, exhibit build-up of static electricity.

The biggest contributing factors of static electricity build-up are low humidity and dry environmental conditions, the type of subframe materials used in construction and the presence of earthing and/or metal balustrading. Whilst installations where static is noticeable are rare, Ekodeck is not in control of these factors and does not warrant against static build-up.

This phenomenon may be reduced by using an anti-static spray (such as ACL Staticide). These products are water based and may require additional applications after rain or other weather conditions. Anti-static mats or insulating touch points such as balustrades or door handles with a sealer may provide a more permanent solution. A clear coat can be applied to insulate touch points – for best results use a UV resistant, outdoor-grade coating. Multiple applications may be required to create an effective insulating barrier.

Generally, the static build-up in the boards tends to reduce over time as the boards wear in.

Ekodeck does not warrant against static build-up in Summit Series boards due to influencing factors beyond our control.